SMC Networks IZN10 Series Operation Manual page 4

WARNING
!
1. The ionizer (hereinafter referred to as the "product") is intended to be used for the general FA devices.
If other applications (especially those indicated in 4 on page 2) are used, contact SMC before use.
2. Use under specified voltage and temperature.
Voltage out of specification may cause malfunction, breakage, electric shock or fire.
3. Use clean compressed air for fluid.
Do not use inflammable or explosive gas for fluid. It may cause fire or explosion. When fluid other than
compressed air is used, contact a SMC service representative.
4. The product doesn't incorporate explosion-proof construction.
Do not use this product in a place where a dust explosion might be triggered or inflammable or explosive
gas is present. It may cause fire.
CAUTION
!
1. The product has not been washed.
Flush and confirm its purification level before bringing into a clean room.
CAUTION
!
1. Do not drop, hit or otherwise apply excessive impact (10 G or more) when handling.
Though the product itself doesn't break, the inside construction may be broken and cause malfunction.
2. When cable is mounted or removed, pinch the modular plug claw with fingers and insert or take out the
plug vertically. If mounted or removed in an inappropriate direction, the mounting part of the modular jack
may be damaged and cause operation failure.
Selection
Handling
- 4 -