Selection Of The Power Supply Devices - Siemens SINUMERIK 840D sl Manual

5.6.2

Selection of the Power Supply Devices

Devices specified in the following table are recommended. These devices satisfy the
associated EN 60204-1 requirements.
Table 5-19 SITOP Power modular recommendation
Rated output current [A]
5
10
20
40
Table 5-20 Control Supply Module recommendation
Rated output current [A]
20
See NC61 catalog.
Warning
When external power supplies are used, e.g. SITOP, the ground potential must be
connected to the protective conductor terminal (PELV).
Guide for the SINUMERIK 840D sl machine configuring
Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
Input voltage range [V]
2AC 85-132/170 – 550
2AC 85-132/176 – 550
3AC 320 – 550
3AC 320 – 550
Input voltage range [V]
3AC 380 -10% (-15% < 1 min) to
3AC 480 +10%
Connection of the Components
5.6 Electronics Power Supply
Short-circuit current [A]
5,5
30 for 25 ms
23
46
Short-circuit current [A]
DC 300 – 800 < 24
Order number
6EP1333-3BA00
6EP1334-3BA00
6EP1336-3BA00
6EP1337-3BA00
Order number
6SL3100-1DE22-
0AA0
5-43