Siemens SINUMERIK 840D sl Manual page 124

Connection of the Components
5.5 DRIVE-CLiQ Topologies
● Once an NX10/15 has been connected and configured, you cannot simply insert it into a
Table 5-17
DRIVE-CLiQ port
X105
X104
X103
X102
X101
X100
The following figure shows a sample topology:
Figure 5-17
5-40
different DRIVE-CLiQ port, as the addresses of the integrated drives are set permanently
from the point of view of the PLC. The following table illustrates this relation:
NX10/15 PROFIBUS addresses
NX10/15 topology
Drive PROFIBUS addresses
15
14
13
12
11
10
Guide for the SINUMERIK 840D sl machine configuring
Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0