Dell EMC Unity Series Installation Manual page 69

Item
IP address mask that identifies the range of IP
l
addresses in the subnet where storage system is
connected.
Gateway:
Default gateway IP address of the storage
l
system management interface.
Prefix Length (IPv6 only):
The number of significant bits in the address
l
that will be used for routing purposes.
Unisphere
Enter the following information to initially log into Unisphere:
Item
Unisphere login information:
When logging into Unisphere for the first time,
l
use the default system account user name and
password
Initial Configuration Wizard
The Initial Configuration Wizard walks you through the initial set up of Unisphere and
prepares the system for use. The first time the wizard launches, you will need to
access the End User License Agreement (EULA) and install Unisphere licenses. Use
the following list of screens and related actions as a guide to the initial configuration
process.
Screen Name
Copyright
Unisphere Password
Unisphere Licenses
DNS servers
NTP Servers
Value
Value
l
l
Action
Accept the EULA.
Set the Unisphere admin and service passwords
Obtain your Unisphere license file online and upload your
license file.
(Manual configuration) Enter the network name or IP address
of one or more DNS servers.
Note
A DNS server is required for EMC Secure Remote Services
(ESRS).
Enter the network name or IP address of one or more NTP
(Network Time Protocol) servers.
Configuration Worksheet
User Name:
admin
Password:
Password123#
Configuration worksheet
69