Stanford Research Systems SR850 User Manual page 165

Setup Plotter
Plot Mode
RS232 GPIB
Baud Rate
9600 bd
Plot Speed
Fast Slow
Define
Pens:
Return:
Plot Mode
Baud Rate
9600 bd
The Setup Plotter submenu configures the SR850 plotter driver. Inter-
face, plot speed, and pen definitions are set in this submenu. To actually
start plotting, use the [PLOT] key to select the Plot menu.
SYSTEM
SETUP
Settings
Plotter
RS232
Plot Speed
Define Pens
Return
The SR850 can drive either an RS232 or GPIB interface plotter. The plot-
ter must be HP-GL compatible. This function selects which interface to
use. The plotter connects to the RS232 or GPIB connector on the rear
panel.
Baud Rate If the Plot Mode is RS232, then the Baud Rate for the
plotter may be selected. The baud rate is adjusted using
the knob and must match the baud rate of the plotter.
5-55
System Setup Menu
Plot Mode
Baud Rate
Trace Pen
Grid Pen
Alpha Pen
Cursor Pen
Return
GPIB
Plotter Address