Stanford Research Systems SR850 User Manual page 162

System Setup Menu
Setup RS232
Baud Rate
9600 bd
Word Length
7 bits 8 bits
Parity
Even
Odd None
Return:
Setup GPIB
GPIB Address
8
Overide Remote?
No Yes
Return:
The Setup RS232 key activates the RS232 parameters submenu. Baud
rate, word length, and parity may be configured in this submenu.
Baud Rate The Baud Rate key allows the knob to adjust the RS232
baud rate. The baud rate can be set to any standard
value from 300 to 19200 baud.
Word Length This key toggles the character length. The RS232 char-
acter length can be 7 or 8 bits. 8 bits is standard.
Parity This key toggles the parity. The RS232 parity can be
Even, Odd, or None.
Return The Return key will return to the Setup Communications
menu.
The Setup GPIB key activates the GPIB parameters submenu. GPIB
instrument address and Remote Overide are set in this submenu.
GPIB Address This key activates the GPIB Address entry field for
numeric and knob entry. The instrument address can be
set from 0 to 30.
Overide Remote ? In general, every GPIB interface command will put the
SR850 into the REMOTE state with the front panel inac-
tivated. To defeat this feature, set the Overide Remote ?
to Yes. In this mode, the front panel is not locked out
when the unit is in the REMOTE state.
If the SR850 is in the REMOTE state, the [HELP] key
returns the unit to local front panel control.
Return The Return key will return to the Setup Communications
menu.
5-52