Display And Scale Menu; Display And Scale; Display Scales - Stanford Research Systems SR850 User Manual

Display and Scale

Format
Single
Up/Down
Monitor
Settings
Input/Output
Display Scale
Full Top
Bottom
Type: Chart
Trace: 1
±
1.000 e0
@ 0.0
10 S /div
Format
Monitor
Display Scale

DISPLAY AND SCALE MENU

The Display and Scale menu selects the screen format, the displayed
traces, and the display types. The bar graph and chart display scales
may be adjusted in this menu. See the Operation section for more infor-
mation about the different displays.
DISPLAY
SCALE
The Format key toggles between single and dual display screen formats.
In dual display format, the [ACTIVE DISPLAY] key selects the active dis-
play for Auto Scale and Cursor functions.
The Monitor key toggles the monitor display between displaying the lock-
in settings and the lock-in inputs and outputs. The monitor display is the
upper two lines of the screen.
The settings monitor displays the sensitivity, dynamic reserve, time con-
stant and rolloff, signal filters, and input configuration.
The Input/Output monitor displays the values of X, Y, R and
the rear panel Aux Inputs.
Each of the displays (full screen, top and bottom) has a Type (bar, chart
or polar). Bars and charts display one of the four data traces. Polar
graphs always plot X and Y. Bars and charts have a range and center
trace value. Charts have a horizontal scale as well.
See the Operation section for a complete description of each type of
display.
5-21
Format
Monitor
Full, Top or Bottom Display
Type
Range
Seconds/div
Trace
Center
as well as