Specifications; Sr560 Low Noise Preamplifier Specifications Chart - Stanford Research Systems SR560 Owner's Manual

SR560 LOW-NOISE PREAMPLIFIER SPECIFICATIONS CHART
Inputs
Impedance
Maximum Inputs
Maximum Output
Noise
CMRR
Gain
Frequency Response
Gain Stability
DC Drift
Filters
Distortion
Power
Battery Life
Charge Time
Mechanical
Dimensions
Warranty

SPECIFICATIONS

Single-ended or true differential
100 MΩ + 25 pF, DC-coupled
1 VDC before overload; 3 V peak to peak max AC coupled;
protected to 100 VDC
10 Vpp
<4 nV/√Hz at 1 kHz
>90 dB to 1 kHz, decreasing by 6 dB / octave (20 dB / decade)
above 1 kHz
1 to 50,000 in 1-2-5 sequence
vernier gain in 0.5% steps
Gains up to 1000, small signal
±0.5 dB to 1 MHz
±0.3 dB to 300 kHz
-3 dB at 1 MHz, 1 Vpp output
200 ppm /°C
5 µV/°C referred to input (DC coupled)
0.03 Hz to 1 MHz, 10% typical accuracy
0.01% typical
100, 120, 220, 240 VAC (50/60 Hz), 60 Watts Max
Internal Batteries: 3 x 12 V, 1.9 Ah sealed
lead-acid (rechargeable)
±12 VDC in / out through rear panel banana jacks.
15 hours nominal
250-1000 charge / discharge cycles
4 hours to 80% of capacity
1/2 Rack-Mount width, 3 1/2" height, weight 15 lbs.
14-7/8" x 8-1/8" x 3-1/2"
1 year parts and labor on materials and workmanship
5