Hp-85, Hp Basic, Via Hpib - Stanford Research Systems SR510 Manual

Program Example 5:
HP85 via GPIB
This program provides an example of an HP85
program using the GPIB interface which could be
used to control the lockin amplifier. In this
example, the SR510 should be addressed as
device #16 by setting the switch bank SW1 per the
instructions Page 7.
10 x=0
OUTPUT 716 ; "Q"
20
30 ENTER 716 : V1
DISP "OUTPUT = " : V1
40
50 X = X + .0025
60 IF X>10 THEN X+0
OUTPUT 716 : "X6,":X
70
80 GOTO 20
49