Advertisement
H2O IR
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it's cover is removed.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6" (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out`
doors voids all warranties.
• During long periods of non-use, disconnect the unit's main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by
t he manufacturer. See page 14 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (inclu-
d ing amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel
when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
ADJ Products, LLC - www.adj.com - H2O IR Instruction Manual Page 4
Safety Precautions
H2O IR
Operation: This fixture is designed to operate as a stand alone
unit and does not require a controller of any type. The H2O IR was
created to meet the demands of theatrical groups and production
groups. The desire was to create a low cost unit with an incredible
effect, without any strong flashing lights or special fog needs. This
unit comes with five built-in colors that can be used to create a vari-
ety of unique effects. This fixture is ready to be plugged in right out of
the box. When the unit is plugged into a matching power supply, the
lamp will strike and the unit's two internal effect wheels will immedi-
ately begin to turn.
On the rear of the unit there is a toggle switch that is used to control
the internal color wheel. When toggle switch is one position the color
wheel will automatically and continuously scroll through the color
wheel. When the color wheel toggle switch is in the opposite position
the color wheel will lock in place. You can create a more dramatic
effect by using split color combinations by stopping the wheel any-
where between two adjacent colors.
Focusing Lens: The lens can be focused by turning it clockwise or
counter-clockwise to focus the lens to your desire.
ADJ Products, LLC - www.adj.com - H2O IR Instruction Manual Page 5
©
Operating Instructions
Advertisement
