Advertisement
S A F E T Y P R E C A U T I O N S
•
This unit has a built in fuse that is designed to blow or trip when the maximum current load (7
amps) is reached or exceeded. The fuse will subsequently need to be replaced. Refer to the Fuse
Replacement section of this manual for detailed information.
•
Be sure the power source matches the required voltage of the device.
•
Disconnect from main power before making any type of connection.
•
Do not remove the cover for any reason. There are no user serviceable parts inside.
•
Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6"
(15cm) between this device and a wall.
•
To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
•
This unit is intended for indoor use only, and use of this product outdoors voids all warranties.
•
During long periods of non-use, disconnect the unit's main power.
•
Always mount this unit in safe and stable matter.
•
Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point at which they exit from the fixture.
•
Do not attempt to remove or break off the ground prong from the electrical cord. This prong is
used to reduce the risk of electrical shock and fire in the event of an internal short.
•
The fixture should be serviced by qualified service personnel when:
A. The power cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into, the appliance.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a marked change in performance.
7
Advertisement
