Sierra Wireless AirCard 550 User Manual page 85

Table 8: Security Tab Options (Continued)
Field
Lock Modem Now
Change Lock Code
Description
This button allows you to enable the Lock Code
feature immediately. (If you select
the previously described drop-down menu, you need
to close the PCS Connection Manager before the lock
code comes into effect.)
When you click the button, the PCS Connection
Manager prompts, "Lock the modem now?". Click
at this prompt to lock the card.
Yes
This button allows you to set a new lock code.
To change the lock code:
1. Tap the
2. Enter your existing lock code (the last
four digits of your phone number unless
you have changed it) at the prompt and
tap
OK
3. Enter a new lock code and tap
4. Enter your new lock code again for
confirmation and tap
5. Tap
OK
Note: Whenever you run the Activation
Wizard, the lock code gets changed to the
last four digits of the phone number that
was most recently activated.
Section 3: Using the PCS Connection Card
Change Lock Code
.
.
OK
.
3D: Menu Options 79
in
on power up
button.
.
OK