Sierra Wireless AirCard 550 User Manual page 28

of launching the software by double clicking an icon on your
desktop (as well as from the Start menu).
Click
If you are running Windows XP, a window indicates that the
driver files will be copied to your notebook. Click
click
each time it appears. A window prompts you to insert the
PCS Connection Card to install the drivers. Click
Installing the PCS Connection Card driver.
Attach the antenna to the PCS Connection Card and, with the label
1.
facing up, carefully insert the card into your PC Card slot. Windows
should detect that a new device has been inserted and launch the
wizard that guides you through the driver installation.
Select
2.
first window of the Found New Hardware Wizard and click
to proceed.
Select the
3.
button, and the
then enter
CD-ROM drive. Click
If a warning appears stating that PCS Connection Card has not
4.
passed Windows Logo testing, click
Click
5.
Click
6.
On completion of this step, the PCS Connection Manager Software and
the PCS Connection Card driver are installed and you can proceed to
activate your card. See "Activating Your PCS Connection Card" on page 24.
Tip: A driver is software that forms the interface between a device (such
as the PCS Connection Card) and the operating system on your PC (such as
Windows XP).
Section 2: Installing the PCS Connection Card
22 2A: Installation on Notebook PCs
to close the last screen of the wizard.
Finish
Continue Anyway
Install from a list or specific location (Advanced)
Search for the best driver in these locations
Include this location in the search
d:\Drivers\WinXP
Next
and repeat steps 1 to 4 as prompted.
Finish
when prompted that the card has been successfully installed.
OK
on the Software Installation window
where is the drive letter of your
d
to proceed to the next window.
Continue Anyway
and
OK
.
OK
on the
Next
radio
check box,
.