Installing The Pcs Connection Manager; Sm Software - Sierra Wireless AirCard 550 User Manual

Installing the PCS Connection Manager

Software
To install the software, you can either:
Connect the host and the Handheld/Pocket PC before you install the
software to the host. (In this case, you are prompted to initiate the
download as soon as the software installation is complete.)
– or –
Install the software to the host and then connect the host and the
Handheld/Pocket PC, as described here.
This process installs the PCS Connection Manager Software and the
PCS Connection Card drivers.
Installing the PCS Connection Manager Software on the Host
To install the software on the host:
Close any Windows programs that are running and insert the
1.
PCS Connection Manager installation CD in your CD-ROM drive.
The CD should auto-start and display a menu.
If the CD does not auto-start, select
2.
d:\launch.exe
From the CD start-up window, select:
3.
Pocket PC installation and documentation
software installation
Windows CE 3.0 MS Pocket PC), or
Pocket PC 2002 installation and documentation
Pocket PC 2002 software installation
running Windows CE 3.0 Pocket PC 2002), or
Handheld PC 2000 installation and documentation
Handheld PC 2000 software installation
Handheld PC running Windows CE 3.0)
This launches the InstallShield
the host.
Use the
4.
noting the following:
You must indicate your acceptance of the terms of the license
agreement by clicking
Section 2: Installing the PCS Connection Card
30 2B: Installation on Handheld and Pocket PCs
where is the drive letter of your CD-ROM drive.
d
and
Next Back
Start > Run
(if you have a Pocket PC running
®
Wizard that installs the software to
buttons to navigate through the wizard
to proceed with the installation.
Yes
SM
and enter
then
Pocket PC
then
(if you have a Pocket PC
then
(if you have a