stop the Ethernet card (see below), disconnect the cable to the Ethernet
card, and Windows 2000/XP automatically begins routing network traffic
through the PCS Connection Card.
Since Windows 2000/XP has this enhanced method of handling multiple
PC Cards, the Network Adapter Manager does not allow you to switch
cards from the shortcut menu in this operating system.
In Windows 2000/XP you can control which card is the primary card by
stopping the cards you do not want to use.
To stop a card:
Click the PC Card icon in the status area.
1.
A listing of active cards is displayed.
2.
Click the card you want to stop.
3.
On-Line Help and Version Information
To display on-line help for the Network Adapter Manager:
Right click the Network Adapter Manager status area icon.
1.
Select
2.
Help
To display version information for the Network Adapter Manager:
Right click the Network Adapter Manager status area icon.
1.
Select
2.
About Network Adapter Manager
Closing the Network Adapter Manager
To close the Network Adapter Manager:
Right click the Network Adapter Manager status area icon.
1.
Select
2.
Exit
3E: The Network Adapter Manager (Notebooks Only) 95
Windows 2000
Windows XP
from the shortcut menu.
from the shortcut menu.
Section 3: Using the PCS Connection Card
from the menu.