Sierra Wireless AirCard 550 User Manual page 64

Table 3: The PCS Connection Manager Keypad
Keypad Buttons
0-9, #,
*
(or the same keys on
your keyboard)
1
TALK
(<Enter> on your
keyboard)
END
(<Esc> on your
keyboard)
BACK
(<Backspace> on your
keyboard)
Volume Control
Section 3: Using the PCS Connection Card
58 3C: Voice Connections
Function
Enter the digits (and other characters) you want to dial. The
numbers are displayed in the message area until you press
, , or
TALK END BACK
If the Any-Key Answer feature is enabled, any of these keys
can be used to answer an incoming call. (See page 80.)
If you click (or press) these buttons during a call, the card
beeps and the characters are displayed in the message area.
In addition to acting as a number key, the
to access voicemail. Press and hold the key for
approximately 2 seconds to connect to your voicemail.
Place and answer incoming calls. When you are not
receiving an incoming call,
message area. If no numbers are displayed, the card redials
the last number you dialed.
End a call or clear all the digits and characters in the
message area (cancel a call that you've started to enter).
This button also clears most status messages.
Clear the last number you've entered. Press and hold
to clear an entire entry.
Increase or decrease the headset volume.
Notebook, Handheld PCs: To increase the volume, move
the slider to the right. To decrease the volume, move the
slider to the left.
Pocket PCs: To increase the volume, move the slider up. To
decrease the volume, move the slider down.
, or you receive an incoming call.
1
dials the numbers in the
TALK
key can be used
BACK