Appendix 1.2 Device Memory Which Can Have Designated Extensions And An Example Of Designation - Mitsubishi MELSEC Q Series Reference Manual

Appendix 1.2 Device memory which can have designated extensions and an example of
designation
Classification Device
Link input
Link output
Link direct Link relay
device
Link special relay
Link register
Link special register
Intelligent
function Buffer register
module (buffer memory)
device
1 "00...0" of device code and head device (or device) designations can be designated by a space (code: 20
APPX - 8
(a) Device memory which can have extensions designated
The extension designation is possible for the following device memory of
the modules on the stations where the C24/E71 is loaded or on the
Q/L/QnACPU station connected over CC-Link IE Controller Network, CC-
Link IE Field Network, MELSECNET/H, or MELSECNET/10.
1) Device memory of the Q/L/QnACPU (refer to Section 3.3.1 (3))
2) Link direct devices of network modules and intelligent function module
devices of intelligent function modules (refer to the table below)
Extension setting
Device code
Type
ASCII Binary ASCII
code code code
X
Y
Bit
B
J F9
H
SB
W
Word
S
Word U F8 G
H
1
Device number range
Binary
code
9C
H
9D
H
A0
H
Specify the number
A1
H
within the device
B4
H
number range of the
B5
H
access-target module.
AB
H
APPENDICES
1
Remarks
Hexadecimal
Hexadecimal
Hexadecimal • Designate network number
in of extension setting.
Hexadecimal
Hexadecimal
Hexadecimal
• Designate input/output
Decimal signal of the target module
in of extension setting.
) as shown in Section 3.3.1 (2) (c) 2) and 3).
H
APPX - 8