Test In Bit Units (Random Write) (Command: 04) - Mitsubishi MELSEC Q Series Reference Manual

6.3.4 Test in bit units (random write) (command: 04)

[Control procedure]
(Data name)
External device
side
(Example)
04 FF 0A
H H
(Data name)
Programmable controller CPU side
(Example)
6 - 29
The examples shown in this section explain the command/response format when
writing data by designating bit device memories at random.
For more details on the order and contents of data items of the areas marked by " "
shown in the control procedure diagram, refer to Section 6.1.
Specifying Y94 to ON, M60 to OFF, and B26 to ON at the programmable controller
CPU on which the E71 is loaded.
(1) Communication in binary code
Designated device
L H L - - - -
00 03 00 94 00 00 00 20
H H H H H H H H H
Y94
Designates to turn Y94 ON.
Designates to turn M60 OFF.
Designates to turn B26 ON.
6 WHEN COMMUNICATING USING THE A COMPATIBLE 1E FRAMES
Designated device
H L - - - - H
59 01 3C 00 00 00 20 4D 00
H H H H H H H H
M60
Designated device
L - - - - H
26 00 00 00 20 42 01
H H H H H H H H
B26
84 00
H H
6 - 29