Understanding Transmission Data In The Character Areas - Mitsubishi MELSEC Q Series Reference Manual

6.1.4 Understanding transmission data in the character areas

6 - 14

The transmission order of bit device data and word device data indicated in the
transmission data (each character area) when communicating using the MC protocol
and A compatible 1E frames is the same as when communicating using QnA
compatible 3E/3C/4C frames or 4E frame.
For more details, refer to Section 3.1.7.
POINT
The "additional code" data shown in the explanation of transmission data in Section
3.1.7 is the data specified by the C24.
When communicating data with the E71, ignore the explanation and diagrams
related to the "additional code".
6 WHEN COMMUNICATING USING THE A COMPATIBLE 1E FRAMES
6 - 14