Deleting Files (Command: 1205): For The Qnacpu - Mitsubishi MELSEC Q Series Reference Manual

3.8.22 Deleting files (command: 1205): for the QnACPU

[Control procedure]
(Data name)
External device
side
(Example)
(Data name)
Programmable controller CPU side
(Example)
3 - 224
3 WHEN COMMUNICATING USING THE QnA COMPATIBLE 3E/3C/4C FRAMES OR 4E FRAME
The examples shown in this section explain the control procedure for deleting an
existing file.
The order and contents of data items of the areas marked by " " shown in the control
procedure diagram differ depending on the module used as well as the frame and
format used for communication.
Refer to the detailed information described in Section 3.1.
(1) When deleting existing memory card A (RAM area, drive name:
01 ) with filename "ABC12.QPG" by communication in ASCII code
H
Fixed to "0000"
(Refer to Section 3.7.1.)
H - - L H - - L H - - - -
1 2 0 5 0 0 0 0 0 1 2 3 0
31 32 30 35 30 30 30 30 30 31 32 33 30
H H H H H H H H H H H H
Keyword valid
Memory card A
(Refer to Section 3.8.1.)
L H L H - - L H - - L H -
0 0 1 0 0 0 1 0 0 0 1 A B
30 30 31 30 30 30 31 30 30 30 31 41 42
H H H H H H H H H H H H H H
Filename with extension
- - - - - L H - L
C 1 2 _ _ _ Q P G
43 31 32 20 20 20 51 50 47 20
H H H H H H H H H H
3- 224