CONNECTION OF CONTROL HARNESS
CONNECTING COMPONENTS
Open, short circuit or poor electrical connections can result in loss of electronic throttle and
gear shift control.
Be sure to take the following precautions:
• Do not cut or extend the wiring harness and lead wires.
Water may enter from the joint of the wiring harness or lead wire, causing a continuity error at
the connections, resulting in shifting and throttle control errors.
Remote control harness
2
6
4
5
(1) Connect the 16-pin connector of the remote control har-
ness to the connector on the engine side.
30
1. Connect the Remote control harness
2. Connect the key less control harness
3. Connect the terminal resistor
4. Connect the sub-battery cable
1
5. Connect the isolator line
3
6. Remote control harness (engine side)
Sub-battery cable