Table of Contents
Advertisement
ST EP 12
Adjust Monitor Arm Tension
•
Adjust the tension of the M8 arm using a 5mm
hex key to match the weight of the monitor(s).
•
Turn clockwise for heavier weights and
counterclockwise for lighter weights.
ST EP 13
Adjust Keyboard Platform Location
•
Loosen the clamp feet and reposition the base
so that the keyboard platform sits in the desired
location, then re-tighten the feet.
ST EP 14
Set Keyboard Platform Angle
•
Lift the release lever on the lower arm
(fig. G) and press the keyboard platform
flat against the desk surface.
•
Press to the lever back down tightly
to lock the platform angle.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the Quick Stand Lite and is the answer not in the manual?
Questions and answers