Environmental Conditions - Tesla Powerwall Installation Manual

Important Safety Instructions
Warning: Do not install Powerwall near heating equipment.
Warning: Do not immerse Powerwall or its components in water or other fluids.
Caution: Do not use cleaning solvents to clean Powerwall, or expose Powerwall to flammable
or harsh chemicals or vapors.
Caution: Do not use fluids, parts, or accessories other than those specified in this manual,
including use of non-genuine Tesla parts or accessories, or parts or accessories not purchased
directly from Tesla or a Tesla-certified party.
Caution: Do not place Powerwall in a storage condition for more than one (1) month, or
permit the electrical feed on the Powerwall to be severed for more than one (1) month,
without placing Powerwall into a storage condition in accordance with Tesla's storage
specifications.
Caution: Do not paint any part of Powerwall, including any internal or external components
such as the exterior shell or casing.
Caution: Do not connect Powerwall directly to photovoltaic (PV) solar wiring.
Caution: When installing Powerwall in a garage or near vehicles, keep it out of the driving
path. If possible, install the Powerwall on a side wall and/or above the height of vehicle
bumpers.
Caution: Powerwall has a pre-installed aesthetic front cover. To prevent damage, keep
Powerwall flat on its back until just before lifting Powerwall onto the wall mount bracket.

ENVIRONMENTAL CONDITIONS

Warning: Install Powerwall at a height that prevents damage from flooding.
Warning: Operating or storing Powerwall in temperatures outside its specified range might
cause damage to Powerwall.
Warning: Do not expose the Powerwall to ambient temperatures above 60°C (140°F) or
below -30°C (-22°F).
Caution: Ensure that no water sources are above or near Powerwall, including downspouts,
sprinklers, or faucets.
Caution: Ensure that snow does not accumulate on top of or around Powerwall.
Tesla Energy 3