Display Settings; Display Time-Out; Alarm Indicators - Eaton EC500 Operation Handbook

EC500 Controller Handbook
For example, if a user wants to change Battery Capacity then go to Home  Main Menu  Settings 
Battery Settings  General Settings Battery Capacity and press Enter. If User is not already logged in, a
pop-up window for PIN entry will appear.
Change the Value
using up/down
navigation and Press
Enter to save.

DISPLAY SETTINGS

In Display Settings, a user can set brightness level.
➢ To set Brightness level
Home  Main Menu  Settings  System Settings  Brightness.
•
• Change level (10% – 100%) using up and down keys.
• Enter to save.

Adjust display intensity according to ambient light, else you may not be able to see the
display values

DISPLAY TIME-OUT

If there is no keypad activity for 60 seconds, the display will jump back to the Home screen.
When the display is at Home screen and there is no user activity for 60 seconds, the display intensity
automatically reduces to half (minimum 10%). If there is no activity for further 180 seconds then the intensity
is reduced to 10%. Display intensity will increase automatically to set value when any key is pressed or any
event occurs.

ALARM INDICATORS

Copyright © 2019 Eaton Corporation. All Rights Reserved.
Issue A March 2019
Enter
Enter
Login Successful and
now the value can
be configured. Press
Enter to Configure.
Enter
Enter PIN to
Login
Enter
Press Login Button
EC500 Operation
Login
Window
Page 15 of 107