C118 Display Switch-Off After Timeout; C119 Warning Alarm Function - JUMO safetyM TB/TW Operating Instructions Manual

7.8

C118 Display switch-off after timeout

Display switch off
0 inactive
1 active
7.9

C119 Warning alarm function

The warning alarm is indicated via LED KV and is output simultaneously at the binary output. The switching action can be
configured as an absolute value or as an interval to the limit value (relative).
Warning alarm function
0 inactive
1 absolute value
2 Interval from the limit value
k
Factory setting
2011-12-31
Comment
Display is permanently switched on.
Display switches off after a timeout and re-appears,
as soon as a key is pressed.
Comment
Warning alarm and LED KV switched off.
Warning alarm limit fixed.
The warning alarm limit varies with the value of the limit set for switching
off the relay.
7 Configuration level
27