Configuration Level - JUMO safetyM TB/TW Operating Instructions Manual

7

Configuration level

All the configuration level parameters C111 - C122 are listed in the table below.
Parameters that are not required are automatically blanked out.
h
In normal display, press
h
Press again for longer than 2 secs and C111 will appear.
Each time you press , you move to the next parameter.
All the parameters are freely accessible at the factory, but can be inhibited via the setup program.
v
Chapter 10.3 "Activating the access code"
2011-12-31
for longer than 2 secs and AL will appear.
7 Configuration level
19