3.1
Mounting location
a
Preferably vibration-free, so that screw terminals cannot work loose!
a
Free from aggressive media, such as strong acids and caustic solutions and preferably free from dust and powder or
other suspended matter, so that ventilation slots cannot get blocked up!
3.2
Close mounting
a
Maintain at least 10 cm of space at the top,
so that the release slot can be accessed with a screwdriver from above.
a
Several instruments can be mounted right next to one another, without a gap.
3.3
Electrical isolation
(1) Measurement input
(3) Binary input
(5) Setup interface
(7) Supply
2011-12-31
(2) Relay output
(4) Binary output
(6) LC Display
3 Mounting and removal
9