Table of Contents
Advertisement
W
'
HAT
S IN THIS
G
UIDE
U
NPACK AND
V
ERIFY THE
E
QUIPMENT
Quick Start
This Quick Start provides the basic steps required for getting your
SCOPIA
Gateway up and running:
100
The suggested order of operation is as follows:
1.
Unpack and Verify the Equipment
2.
Prepare a Checklist
3.
Prepare the Site
4.
Mount the SCOPIA100 Gateway Unit in a 19" Rack
(Optional)
5.
Assign an IP Address to the Gateway
6.
Connect to the IP Network
7.
Connect to the ISDN Network (PRI and BRI
Gateways only)
8.
Connect to the Serial Interface (Serial Gateways
only)
9.
Configure the Gateway
10.
Make Trial Calls
Note For more detailed information, see the SCOPIA
Gateway User Guide.
The shipping box for a single SCOPIA
the following items:
SCOPIA
100
Power cable (depending on customer location)
Terminal cable
LAN cable
Rack mounting kit (two brackets and six screws)
Four rubber feet
SCOPIA
100
100
Gateway unit
Gateway User Guide (in PDF format only)
100
Gateway unit includes
What's in this Guide
1
Advertisement
Table of Contents
