RADVision SCOPIA 100 Quick Start Manual page 12

10 SCOPIA Gateway Quick Start
100
7. Press any key during the six-second countdown to
enter the configuration menu.
The network configuration Main menu displays as
shown at Figure
countdown ends, the Gateway continues its initialization
and you can only configure the Gateway by pressing the
Reset button on the front panel.
Press any Key To start
configuration...
Main menu
Enter <N> to configure default
network port values
Enter <P> to change the
configuration software password
Enter <A> to display advanced
configuration menu
Enter <Q> to quit configuration
menu and start GW
Figure 2
Warning Configuration of any of the parameters other than
<N> should not be performed by an unauthorized person.
2. If you do not press a key before the
Network Configuration Main
Menu