Table of Contents
Advertisement
3.
If your Gateway supports two PRI ports, enable the
second PRI port and define the phone numbers
used for that port.
4.
Check the Same as Port checkbox to duplicate
the settings from the first PRI port in each of the
remaining sections: Physical Interface,
Advanced ISDN, Call Policies and Supported
Services.
BRI Ports
Configure your Gateway BRI port. When the first port is
configured, you can use the Same as Port checkbox to
duplicate settings from one BRI port to the other.
Procedure
1.
In the Gateway interface BRI Port tabs Basics
section, enable the port and define the phone
numbers for this port.
2.
In the Physical Interface, Call Policies and
Supported Services sections, define the settings
you want for this port. Follow your checklist to help
organize the settings.
3.
Check the Same as Port checkbox to duplicate
the settings from the first BRI port in each of the
remaining sections: Physical Interface, Call
Policies and Supported Services.
Serial Ports
Configure your Gateway serial ports. When the first port is
configured, you can use the Same as Port checkbox to duplicate
settings from one serial port to the other.
Configure the Gateway 15
Advertisement
Table of Contents
