Advertisement
Instructions (Cont.)
TIMER ON function
Program the timer to switch the
unit on automatically (Fig. 20).
• To program the start time, make sure
the unit is switched off.
• Press the TIMER button on the remote
control for the first time to activate the
timer, then use the
the desired temperature.
• Press the TIMER button a second
time, then use the
the time period after which the unit will
switch on. With every press of the
or
button
an hour. Keep pressing until the display
shows the time that passes between
programming and the start time.
• Press the TIMER button a third time to
confirm the setting. The TIMER icon will
be illuminated on the indoor unit display
(Fig. 21).
Example:
If it is 11am now and you want the unit
to come on at 1pm, you must press
the button four times for the two-hour
period.
• To cancel the set function, press the
TIMER button again.
• Before proceeding with the timed start, program the working mode (with
the MODE button) and the fan speed (with the FAN button). Then switch
the air conditioner off (with the POWER button).
• In case of a power failure or other disconnections from the power supply,
you will have to reset your timer settings.
22
1300 886 649 (AUS) 0800 836 761 (NZ) |
or
button
or
button
, the time will adjust by half
After Sales Support
Fig. 20
to set
to set
Fig. 21
IMPORTANT!
info@tempo.org
Hide quick links:
Advertisement
