Table of Contents
Advertisement
10 Servicing, maintenance, disposal
10.1 Cleaning
• Before cleaning, disconnect the appliance from the operating voltage.
• Do not use aggressive detergents (solvents or similar).
10.2 Servicing, maintenance
The appliance may only be opened by trained service technicians who are authorized
by KERN.
Before opening, disconnect from power supply.
10.3 Disposal
Disposal of packaging and appliance must be carried out by operator according to
valid national or regional law of the location where the appliance is used.
10.4 Error messages
Error message
+/-RRR(EEE)
Should other error messages occur, switch balance off and then on again. If the error
message remains inform manufacturer.
20
Description
No defined signal
Overload display
Underload display
Possible causes
• Weighing platform not connected.
• Too much weight on the weighing
platform.
• Insufficient weight on the weighing
platform.
VHP-T-BA_IA-e-1611
Advertisement
Table of Contents
