Satel ROP-101/EU Manual

Manual call point

ROP-100/EU • ROP-101/EU

MANUAL CALL POINT

rop-100_en 08/19

This manual covers the following devices:

ROP-100/EU - conventional manual call point for indoor applications (Fig. 1);

ROP-101/EU - conventional manual call point for outdoor applications (Fig. 2).

The manual call points enable manual actuation of a fire alarm if fire is noticed. They are

designed to be used in conjunction with the CSP-104, CSP-108, CSP-204 and CSP-208 fire

alarm control panels.

Prior to installation, read this manual carefully in order to avoid mistakes or errors which

might result in malfunctioning of or even damage to the equipment. This manual contains

guidelines for installation of the manual call points (MCPs) and their connection to the fire

alarm control panel.

Table of Contents

Need help?

Do you have a question about the ROP-101/EU and is the answer not in the manual?

Page 1 This manual covers the following devices: ROP-100/EU - conventional manual call point for indoor applications (Fig. 1); ROP-101/EU - conventional manual call point for outdoor applications (Fig. 2). The manual call points enable manual actuation of a fire alarm if fire is noticed. They are designed to be used in conjunction with the CSP-104, CSP-108, CSP-204 and CSP-208 fire alarm control panels.
Page 2 1. Run the cables to the enclosure base. In the case of ROP-101/EU, you must previously make a hole for the cable gland (see also Fig. 5). 2. Secure the enclosure base to the wall. In the case of ROP-101/EU, you must use some additional fastenings (see also Fig. 5).
Page 3 Note: The ROP-BT base, provided with dedicated terminals for screen connection, is available in the product range offered by SATEL. The ROP-BT base can be used instead of the one included in the manual call point delivery set.
Page 4: Specifications
EMC 2014/30/EU Electromagnetic Compatibility Directive; An EC Certificate of Conformity No. 1438-CPR-0342 was issued by the CNBOP-PIB Jozefow Certification Body for the ROP-100/EU / ROP-101/EU manual call point to confirm its compliance with the requirements of PN-EN 54-11:2004 + PN-EN 54-11:2004/A1:2006 standards.

Rop-100/eu