Emerson Rosemount 3051HT Quick Start Manual page 12

Quick Start Guide
Table 2-1: Device Revision 9 and 10 (HART7), DD Revision 1 Fast Key
Sequence (continued)
Function
Loop Test
Lower Sensor Trim
Message
Scaled D/A Trim (4–20 mA Output)
Sensor Temperature/Trend (3051S)
Upper Sensor Trim
Digital Zero Trim
Password
Scaled Variable
HART Revision 5 to HART Revision 7 switch
Long Tag
Find Device
Simulate Digital Signal
(1) Only available in HART Revision 7 mode.
2.4.2 Verifying configuration with LOI
The optional LOI can be used for commissioning the device. The LOI is a two-
button design with internal and external/rear buttons. On a polished stainless
steel housing, buttons are located internally both on the display and terminal
side of the transmitter. On an aluminum housing, buttons are located on the
display and externally underneath the top metal tag. To activate the LOI, push
any button. LOI button functionality is shown on the bottom corners of the
display. See
information.
12
(1)
(1)
(1)
Table 2-2 and Figure 2-6
Fast Key Sequence
HART 7
3, 5, 1
3, 4, 1, 2
2, 2, 7, 1, 6
3, 4, 2
3, 3, 3
3, 4, 1, 1
3, 4, 1, 3
2, 2, 6, 5
3, 2, 2
2, 2, 5, 2, 3
2, 2, 7, 1, 2
3, 4, 5
3, 4, 5
for button operation and menu
February 2019
HART 5
3, 5, 1
3, 4, 1, 2
2, 2, 7, 1, 5
3, 4, 2
3, 3, 3
3, 4, 1, 1
3, 4, 1, 3
2, 2, 6, 4
3, 2, 2
2, 2, 5, 2, 3
N/A
N/A
N/A
Emerson.com/Rosemount