Changing The Volume; Using Do Not Disturb; Incoming Text Messages - Jeep Wrangler 2018 User Manual

Changing The Volume

• Start a dialogue by pushing the VR button
, then say a command. For example,
"Help".
• Use the radio VOLUME/MUTE rotary knob
to adjust the volume to a comfortable level
while the Uconnect system is speaking.
NOTE:
The volume setting for Uconnect is different
than the audio system.
NOTE:
To access help, push the VR button
steering wheel and say "help." Push the VR
button and say "cancel" to cancel the
help session.

Using Do Not Disturb

With Do Not Disturb, you can disable notifi-
cations from incoming calls and texts, allow-
ing you to keep your eyes on the road and
hands on the wheel. For your convenience,
there is a counter display to keep track of
your missed calls and text messages while
you were using Do Not Disturb.
294
To activate Do Not Disturb, select "Pairing"
on the phone menu bar, and select "Do Not
Disturb" from the Settings menu. You can
also activate it using the "Do Not Disturb"
button at the top of every Phone screen.
Do Not Disturb can automatically reply with a
text message, a call or both, when declining
an incoming call and send it to voicemail.
Automatic reply messages can be:
• "I am driving right now, I will get back to
you shortly."
• Create a custom auto reply message up to
on the
160 characters.
While in Do Not Disturb, Conference Call can
be selected so you can still place a second
call without being interrupted by incoming
calls.
NOTE:
• Only the beginning of your custom message
will be seen on the touchscreen.
• Reply with text message is not compatible
with iPhones.
• Auto reply with text message is only avail-
able on phones that supporting Bluetooth
MAP.

Incoming Text Messages

After pairing your Uconnect system with a
Bluetooth enabled mobile device with the
Message Access Profile (MAP), the Uconnect
system can announce a new incoming text
message and read it to you over the vehicle's
audio system.
To listen to incoming text messages, or any
messages currently on the mobile phone,
select the "Messages" menu and press the
"Listen" button next to the message you want
to listen to.
NOTE:
Only incoming text messages received during
the current ignition cycle can be viewed/read.
To Enable Incoming Text Messaging:
iPhone
1. Press the settings button on the mobile
phone.
2. Select Bluetooth.