Jeep Wrangler 2018 User Manual page 79

Hide thumbs Also See for Wrangler 2018:
Table of Contents

Advertisement

"Adaptive Cruise Control (ACC) — If
Equipped" in "Starting And Operating" for
further information.
2H
— Two Wheel Drive High Indicator
Light — If Equipped With a Premium Cluster
This light alerts the driver that the vehicle is
in the two wheel drive high mode.
— Active Speed Limiter Ready Indicator
Light — If Equipped
This light will turn on when the Active Speed
Limiter is on, but not set.
— Active Speed Limiter SET Indicator
Light — If Equipped With A Base Instrument
Cluster
This light will turn on when the Active Speed
Limiter is on and set to a specific speed.
Refer to "Active Speed Limiter — If Equipped"
in "Starting And Operating" for further infor-
mation.
— Hill Descent Control (HDC) Indicator
Light — If Equipped
This indicator shows when the Hill Descent
Control (HDC) feature is turned on. The lamp
will be on solid when HDC is armed. HDC can
only be armed when the transfer case is in the
"4WD LOW" position and the vehicle speed
is less then 30 mph (48 km/h). If these
conditions are not met while attempting to
use the HDC feature, the HDC indicator light
will flash on/off.
— Rear Seat Belt Fastened Indicator
Light — If Equipped
This light indicates when a rear seat belt has
been buckled in the second row. A telltale will
display in the upper right corner of the instru-
ment cluster display to correspond to the
specific seating position once the seat belt
has been buckled.
Refer to "Occupant Restraint Systems" in
"Safety" for further information.
— Rear Seat Belt Reminder Indicator
Light — If Equipped
This light indicates when a rear seat belt is
unbuckled in the second row. When the igni-
tion is first placed in the ON/RUN or ACC/ON/
RUN position, and if a seat belt in the second
row is unbuckled, a light corresponding to
the specific seat will turn on in the upper
right portion of the instrument cluster dis-
play, momentarily replacing the configurable
corner information. If a second row seat belt
that was buckled at the start of the trip is
unbuckled, the Rear Seat Belt Reminder
Light will change from the buckled to the
unbuckled symbol, and a chime will sound.
Refer to "Occupant Restraint Systems" in
"Safety" for further information.
— Rear Seat Unoccupied Indicator
Light — If Equipped
This light indicates when the rear passenger
seats are unoccupied, and will illuminate in
the upper right portion of the instrument
cluster display, momentarily replacing the
configurable corner information.
Refer to "Occupant Restraint Systems" in
"Safety" for further information.
— Speed Warning Indicator Light —
If Equipped
When Set Speed Warning is turned on, the
speed warning telltale will illuminate in the
instrument cluster with a number matching
the set speed. When the set speed is ex-
77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents