Jeep Wrangler 2018 User Manual page 57

Torx Head Screw Location — Right Side
Shown
4. Remove the six Torx head screws that
secure the hard top to the vehicle (along
the interior bodyside — three screws on
each side) using the #50 Torx head driver.
Torx Head Screw Locations — Right Side
Shown
5. Open the swing gate all the way to ensure
clearance of the rear window glass. Lift
the rear window glass.
6. Locate the wire harness and washer hose on
the left rear inside corner of the vehicle.
7. Disconnect the wire harness by its release
tab, followed by the washer hose by push-
ing the release button on the hose.
Wire Harness And Washer Hose Location
1 — Wire Harness
2 — Washer Hose
8. Lower the rear window glass and close the
swing gate.
9. Remove the hard top from the vehicle.
Place the hard top on a soft surface to
prevent damage.
55