Radio Operation; Voice Text Reply (Not Compatible With Iphone) - Jeep Wrangler 2018 User Manual

Radio Operation

Radio Operation
1 — Radio Station Preset
2 — All Presets
3 — Seek Next
4 — Audio Settings
5 — Station Information
6 — Direct Tune
7 — Radio Band
8 — Seek Previous
Store Radio Presets Manually
The Radio stores up to 12 presets in each of
the Radio modes. There are four visible pre-
sets at the top of the radio screen. Pressing
the "All" button on the touchscreen on the
radio home screen displays all of the preset
stations for that mode.
To store a radio preset manually, follow the
steps below:
1. Tune to the desired station.
2. Press and hold the desired numbered but-
ton on the touchscreen for more than two
seconds, or until you hear a confirmation
beep.
Seek Next/Previous Buttons
• Press the Seek Next or Seek Previous but-
ton to seek through radio stations in AM,
FM or DAB bands.
• Hold either button to bypass stations with-
out stopping.
Voice Text Reply (Not Compatible With
iPhone)
Once your Uconnect system is paired with a
compatible mobile device, the system can
announce a new incoming text message, and
read it to you over the vehicle audio system.
You can reply to the message using Voice
Recognition by selecting, or saying, one of
the 18 pre-defined messages.
Here's How:
1. Push the Voice Recognition (VR)
the Phone button and wait for the beep,
then say "reply." Uconnect gives the fol-
lowing prompt: "Please say the message
you would like to send."
2. Wait for the beep and say one of the
pre-defined messages. (If you are not
sure, you can say "help"). Uconnect will
then read the pre-defined messages
allowed.
or
257