Rail Installation Pin; Installed The Rack Rails - Intel Omni-Path Switch 100 Series Installation Manual

Figure 6.

Rail Installation Pin

a. Fasten the rail using two (2) M6 screws.
b. Torque screws to 30 in-lb.
c. Repeat this step for the second rail.
2. Fasten the port-side rails using four (4) M6 screws.
a. Torque screws to 30 in-lb.
Note the orientation of mounting rails in the following figure. The rails are
shown from the front side of the rack.
Figure 7.

Installed the Rack Rails

®
Intel Omni-Path Fabric Switches Hardware
Installation Guide
34
®
Intel Omni-Path Fabric—Installation
Doc. No.: H76456, Rev.: 10.0
June 2019