®
Installation—Intel
Omni-Path Fabric
Figure 17.
Switch Fascia
The fascia is installed by snapping it in place onto the switch rail posts.
Figure 18.
Rail Posts for Fascia Installation
2.3.5
Reversing the Fan Airflow
This section details the procedure to reverse the airflow on the switch fan assembly
from the default port-side exhaust position.
Tools Required
•
ESD wrist strap
•
#0 Phillips screwdriver
Procedure
NOTE
Before removing the cover from the switch, first disconnect the power cord(s).
June 2019
Doc. No.: H76456, Rev.: 10.0
®
Intel
Omni-Path Fabric Switches Hardware
Installation Guide
41