Intel ® Omni-Path Director Class Switch 100 Series Installation; Mounting Hardware Kit Contents; Unpacking The Switch; Q7 Module Mounting Screw - Intel Omni-Path Switch 100 Series Installation Manual

®
Installation—Intel Omni-Path Fabric
Figure 25.

Q7 Module Mounting Screw

4. Reattach the switch cover.
NOTE
For information on upgrading Q7 board controller firmware (BCFW) and BIOS, refer to
Q7 BIOS Update
®
2.4 Intel
Installation
2.4.1

Mounting Hardware Kit Contents

The Mounting Kit contains:
• Support Shelf (1)
• Baffles (2)
• #10 Mounting screws
• #10 Mounting nuts
• M6 Mounting Screws
2.4.2

Unpacking the Switch

NOTE
Set aside packaging materials in the event that the switch requires return shipment.
The following images and descriptions give a high-level overview for unpacking a
Director Switch (24-slot model in this example).
June 2019
Doc. No.: H76456, Rev.: 10.0
on page 86.
Omni-Path Director Class Switch 100 Series
®
Intel Omni-Path Fabric Switches Hardware
Installation Guide
45