®
Installation—Intel
Omni-Path Fabric
Figure 21.
Wire Assembly Strain Relief and Airflow Direction Indicators
4. Reattach the switch cover.
2.3.6
Installing the Q7 Management Module
This section details the procedure to install the Q7 Management Module into an
existing externally-managed edge switch.
Figure 22.
Q7 Management Module
Tools Required
•
ESD wrist strap
•
#0 Phillips screwdriver
•
Regular screwdriver
Procedure
NOTE
Before removing the cover from the switch, first disconnect the power cord(s).
June 2019
Doc. No.: H76456, Rev.: 10.0
®
Intel
Omni-Path Fabric Switches Hardware
Installation Guide
43