Boston Scientific LATITUDE Series Patient Manual page 61

• Check that the switches on the
bottom of the Communicator are
set correctly for your country and
whether you need to dial a number
to get an outside line. Refer to
"Confirming Switch Settings" on
page 19.
If using the cellular data network:
• Move the Communicator to another
location that may provide a stronger
cellular signal.
If using the Internet (LATITUDE USB
Ethernet Adapter):
• Make sure the Ethernet cable
provided with the USB Ethernet
Adapter is connected to the
Ethernet port for your internet
service.
To verify that troubleshooting was a
success:
• Press and hold the Status button
on the back of the Communicator
until the Sending Waves flash green
in sequence and repeat. If the
connection is successful, all three
Sending Waves will light green for 2
minutes.
LATITUDE Communicator Patient Manual
™
57