Boston Scientific LATITUDE Series Patient Manual page 30

How to Set Up Your USB Cellular Adapter
Complete the following steps to set up the
Communicator for a cellular data network connection.
USB Cellular Adapter
(Model 6290 only)
Figure 5. Using the Cellular Data Network
1. Insert the AC adapter (included) into the jack
labeled
2. Plug the AC adapter into an electrical outlet that is
easily accessible.
• The LATITUDE indicator will flash yellow for up
to one minute.
• All the Communicator indicators will light for
approximately one second.
• If the LATITUDE indicator is not lit, check that
both ends of the AC adapter are plugged in
firmly. Check if the light on the AC adapter is lit.
26
LATITUDE
.
Communicator Patient Manual
™