Using a Standard Telephone Connection
Complete the steps below to set up the
Communicator for a standard telephone connection.
5. Connecting a telephone is optional.
Figure 4. Using a Standard Telephone Connection
1. Insert the AC adapter (included) into the jack
labeled
2. Plug the AC adapter into an electrical outlet that is
easily accessible.
• The LATITUDE indicator will flash yellow for up
to one minute.
• All the Communicator indicators will light for
approximately one second.
• If the LATITUDE indicator is not lit, check that
both ends of the AC adapter are plugged in
firmly. Check if the light on the AC adapter is lit.
22
LATITUDE
.
Communicator Patient Manual
™