Setting Switches For Pbx Or Dial-Out Numbers - Boston Scientific LATITUDE Series Patient Manual

Setting Switches for PBX or Dial-out Numbers

(This section applies only to standard telephone
connections.) You can use your Communicator with
a private branch exchange (PBX) in a managed care
facility, hotel, or other location that requires you to enter
a dial-out number or prefix to place an outside call. The
first three white switches (1, 2, and 3) on the bottom of
the Communicator must be set to match your dial-out
number. If using the USB Cellular Adapter or Internet
(LATITUDE USB Ethernet Adapter), switches 1-3 do
not matter.
Switch settings for different dial-out numbers are shown
in "Figure 9. Dial-out Number Switch Settings" on page
69. Refer to "Confirming Switch Settings" on page
19 for information on switches 4-8.
Dial-out
Number
None
0
1
7
Figure 9. Dial-out Number Switch Settings
Dial-out
Number
LATITUDE Communicator Patient Manual
™
8
9
*99
69