Advertisement
1. KEEP GUARDS IN PLACE and in working order.
2. REMOVE WRENCHES AND OTHER TOOLS.
3. KEEP WORK AREA CLEAN.
4. DON'T USE IN DANGEROUS ENVIRONMENT.
Don't use the Grinder in damp or wet locations.
Machine is for indoor use only. Keep the work area
well lit.
5. KEEP ALL VISITORS AWAY. All visitors should be
kept a safe distance from the work area.
6. MAKE THE WORK AREA CHILD-PROOF with
padlocks or master switches.
7. DON'T FORCE THE GRINDER. It will do the job
better and safer if used as specified in this manual.
8. USE THE RIGHT TOOL. Don't force the Grinder
or an attachment to do a job for which it was not
designed.
9. WEAR PROPER APPAREL. Wear no loose clothing,
gloves, neckties, or jewelry which may get caught in
moving parts. Nonslip footwear is recommended.
Wear protective hair covering to contain long hair.
Wear respirator or filter mask where appropriate.
Wear protective gloves.
10. ALWAYS USE SAFETY GLASSES.
11. SECURE YOUR WORK. Make certain that the
cutting unit is securely fastened with the clamps
provided before operating.
12. DON'T OVERREACH. Keep proper footing and
balance at all times.
TO VOID INJURY, READ AND UNDERSTAND THE SAFETY ITEMS LISTED BELOW.
IF YOU DO NOT UNDERSTAND ANY PART OF THIS MANUAL AND NEED
ASSISTANCE, CONTACT YOUR LOCAL DEALER OR THE MANUFACTURER.
SAFETY INSTRUCTIONS
13. MAINTAIN GRINDER WITH CARE. Follow
instructions in the Operators and Service Manual for
lubrication and preventive maintenance.
14. DISCONNECT POWER BEFORE SERVICING, or
when changing the grinding wheel.
15. REDUCE THE RISK OF UNINTENTIONAL
STARTING. Make sure the all switches are OFF
and the E-stop is pressed in before plugging in the
Grinder.
16. USE RECOMMENDED ACCESSORIES.
Consult the manual for recommended accessories.
Using improper accessories may cause risk of
personal injury or damage to the equipement.
17. CHECK FOR DAMAGED PARTS. A guard or other
part that is damaged or will not perform its intended
function should be properly repaired or replaced.
18. NEVER LEAVE THE GRINDER RUNNING
UNATTENDED. TURN THE POWER OFF.
Do not leave grinder until it comes to a complete
stop.
19. KNOW YOUR EQUIPMENT. Read this manual
carefully. Learn its application and limitations as well
as the specific potential hazards.
20. KEEP ALL SAFETY DECALS CLEAN AND LEGIBLE.
If safety decals become damaged orillegible for any
reason, replace immediately. Refer to replacement
parts illustrations in Service Manual for the proper
location and part numbers of safety decals.
21. DO NOT OPERATE GRINDER WHEN UNDER THE
INFLUENCE OF DRUGS, ALCOHOL, OR MEDICATION.
5
Advertisement
