Safety Instructions - Foley United 388 Assembly And Service Manual

SAFETY INSTRUCTIONS

Safety Awareness Symbols are inserted into this
manual to alert you to possible Safety Hazards .
Whenever you see these symbols, follow their
instructions.
The Warning Symbol identifies special instructions or
procedures which, if not correctly followed, could result
in personal injury.
1. KEEP GUARDS IN PLACE and in working order.
2. REMOVE WRENCHES AND OTHER TOOLS.
3. KEEP WORK AREA CLEAN.
4. DON'T USE IN DANGEROUS ENVIRONMENT .
Don't use Grinder in damp or wet locations, or
expose it to rain. Keep work area well lighted.
5. KEEP ALL VISITORS AWAY . All visitors should
be kept a safe distance from work area.
6. MAKE WORK AREA CHILD-PROOF with
padlocks or master switches.
7. DON'T FORCE THE GRINDER.
better and safer if used as specified in this manual.
8. USE THE RIGHT TOOL. Don't force the Grinder or
an attachment to do a job for which it was not designed.
9. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, or jewelry which may
get caught in moving parts. Nonslip footwear is
recommended. Wear protective hair covering to
contain long hair.
10. ALWAYS USE SAFETY GLASSES .
11. SECURE YOUR WORK. Make certain that the
cutting unit is securely fastened with the clamps
provided before operating.
12. DON'T OVERREACH. Keep proper footing and
balance at all times.
The Caution Symbol identifies special instructions
or procedures which, if not strictly observed, could
result in damage to or destruction of equipment.
13. MAINTAIN GRINDER WITH CARE. Follow
instructions in Service Manual for lubrication and
preventive maintenance.
14. DISCONNECT POWER BEFORE SERVICING, or
when changing the grinding wheel.
15. REDUCE THE RISK OF UNINTENTIONAL
STARTING. Make sure the switch is OFF before
plugging in the Grinder.
16. USE RECOMMENDED ACCESSORIES. Consult
the manual for recommended accessories. Using
improper accessories may cause risk of personal
injury.
It will do the job 17. CHECK DAMAGED PARTS. A guard or other part
that is damaged or will not perform its intended
function should be properly repaired or replaced.
18. NEVER LEAVE GRINDER RUNNING UNATTENDED.
TURN POWER OFF. Do not leave grinder until it
comes to a complete stop.
19. KNOW YOUR EQUIPMENT.
carefully. Learn its application and limitations as
well as specific potential hazards.
20. KEEP ALL SAFETY DECALS CLEAN AND
LEGIBLE. If safety decals become damaged or
illegible for any reason, replace immediately. Refer
to replacement parts illustrations in Service Manual
for the proper location and part numbers of safety decals.
21. DO NOT OPERATE THE GRINDER WHEN UNDER
THE INFLUENCE OF DRUGS, ALCOHOL, OR
MEDICATION.
2
Read this manual