Advertisement
Safety Message ......................................................................................................... 2
Safety Instructions .................................................................................................... 3-9
Machine Installation and Wiring Information .......................................................... 10-13
Getting to Know your Grinder .................................................................................. 14-20
Operating Instructions .............................................................................................. 21-44
Maintenance & Lubrication ...................................................................................... 45-48
Setup Chart ............................................................................................................... 49
Read this manual before operating this equipment. Keep this manual handy for ready reference.
Require all operators to read this manual carefully and become acquainted with all adjustments and
operating procedures before attempting to operate the equipment. Replacement manuals can be obtained
from your selling dealer or the manufacturer.
The equipment you have purchased has been carefully engineered and manufactured to provide
dependable and satisfactory use. Like all mechanical products, it will require cleaning and upkeep. Lubricate
and clean the unit as specified. Please observe all safety information in this manual and safety decals on
the equipment.
This machine is designed for sharpening reel type mower blades ONLY.
Any use other than this may cause personal injury and void the warranty.
To assure the quality and safety of your machine and to maintain the
warranty, you MUST use original equipment manufacturer's replacement
parts and have any repair work done by a qualified professional.
ALL operators of this equipment must be thoroughly trained BEFORE
operating the equipment.
Do not use compressed air to clean grinding dust from the machine.
This dust can cause personal injury as well as damage to the grinder.
Before using this equipment refer to the list below. Verfy that all of the listed items are
completed before powering up the equipment:
1. Equipment is completely assembled
2. All shields are in place and in good condition.
3. All decals are in place and readable.
4. Overall condition good (i.e. paint, welds, electrical)
5. Verify there is sufficient electrical power to
operate the machine.
6. Read and understand all areas of the Operators
manual, and review the Assembly & Service Manuals,
and any additional training material if available.
TABLE OF CONTENTS
PREPARATION/INSTALLATION CHECK LIST
7. Understand proper positioning of reel.
8. Understand the use of reel grinder relief
mechanism
9. Understand traverse proximity switch
positioning
10. Understand use of the reel alignment gauge
11. Understand spin speed vs. quality
12. Understand the reel set-up chart in manual
13. Understand General Maintenance
3
Advertisement
