Advertisement
READ AND UNDERSTAND AND LOCATE ALL DECALS ON THIS MACHINE BEFORE
OPERATING THIS EQUIPMENT.
1
Keep visitors at a safe distance away from
the equipment.
2
Read Service manual and disconnect
power before servicing.
3
Refer to manual– after installation,
read the user's guide carefully before
operating. Follow all operating and
other instructions carefully.
4
WARNING! Use of proper eyewear
is mandatory when operating this
equipment.
5
WARNING! Gloves or other hand
protection is required when operating
this equipment.
6
WARNING! Operators and people in close
proximity must wear respirators or have
adequate ventilation systems
7
WARNING! Hearing protection
required when operating this
equipment.
8
This is the electrical hazard symbol. It
indicates that there are DANGEROUS
HIGH VOLTAGES PRESENT inside the
enclosure of this product. TO REDUCE
THE RISK OF FIRE OR ELECTRIC SHOCK,
do not attempt to open the enclosure or
gain access to areas where you are not
instructed to do so. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
9
Entanglement Hazard. Keep clear
of belt.
10
11
12
13
14
15
.
16
17
18
9
SAFETY INSTRUCTIONS
Sharp object in the vicinity which
may cause injury. Keep hands clear
of sharp edges!
Power cord may be a trip hazard.
Secure the power cord in a manner
that removes it as a trip hazard.
Use a Fork Lift with a minimum of
48" [122cm] long forks to move this
Equipment. Lift only where indicated
on the machine. Failure to use proper
lifting equipment may result in personal
injury or damage to the equipment.
Unplug the machine when servicing
or storing for an extended period of
time.
WARNING! Do Not Operate
Without Guards and Covers in
Place. There are moving parts
located behind guard.
WARNING! Keep exposed gasoline or
flammables away from the grinder
because it operates with a large amount
of sparks.
Shows the minimum speed [3600 RPM]
that the grinding wheel must be rated for
3600
MIN
to use on this equipement.
POWER CORD PROTECTION – The power
supply cord for this product acts as the
main-disconnect. It should be routed or
installed in such a manner to protect it
from being walked on or pinched. The unit
should be powered down completely before
connecting or disconnecting the power
cable. The power cord should be removed
before moving the unit. The power cord
must be placed near an easily accessible
unobstructed socket outlet.
WINCH AND BOOM CAPACITY IS A MAXIMUM
OF 180Kg OR 400 LBS. Exceeding the capacity
may result in personal injury or damage to the
equipment.
Advertisement
